The Siemens 6AG1193-6AG00-2AA0 is a SIPLUS ET 200SP BA 2xLC PROFINET Bus Adapter based on the standard 6ES7193-6AG00-0AA0. It belongs to the SIPLUS Bus Adapters family and adds conformal coating for applications requiring increased environmental robustness. The product provides one PROFINET interface with two switched LC multimode glass-fiber ports. Siemens-related documentation identifies the SIPLUS version as a conformal-coated BA 2xLC, with an operating range of -40 to +60 °C. The underlying interface supports multimode graded-index fiber in 50/125 µm and 62.5/125 µm formats up to 3 km. The adapter is intended for compatible ET 200SP PROFINET devices and is used to establish optical PROFINET communication through LC glass-fiber connections.  

2. Technical Specification

Specification	Details
Manufacturer	Siemens
Product Code	6AG1193-6AG00-2AA0
Product Family	SIPLUS ET 200SP Bus Adapters
Product Type	SIPLUS BA 2xLC PROFINET Bus Adapter
Base Product	6ES7193-6AG00-0AA0
PROFINET Interfaces	1
Port Configuration	2-port switch
LC Ports	2
Fiber Type	Multimode glass fiber
Fiber 50/125 µm	Up to 3 km
Fiber 62.5/125 µm	Up to 3 km
Optical Wavelength	1,270–1,380 nm
Optical Standard	100BASE-FX
Horizontal Operating Temperature	-40 to +60 °C
Conformal Coating	Yes; Class 2 for high reliability
Protection Against Fouling	Type 1 according to cited documentation
Dimensions	20 × 69.5 × 59 mm
Weight	Approx. 40 g
Product Family Status	SIPLUS Bus Adapters

Technical data and SIPLUS characteristics verified from available documentation.

3. Key Features

• SIPLUS ET 200SP BA 2xLC configuration.
• Based on Siemens 6ES7193-6AG00-0AA0.
• Conformal-coated SIPLUS design.
• One PROFINET interface with two switched LC ports.
• Multimode glass-fiber connectivity.
• Supports 50/125 µm multimode fiber up to 3 km.
• Supports 62.5/125 µm multimode fiber up to 3 km.
• Extended -40 to +60 °C operating range documented for the SIPLUS version.
• Conformal coating classified as Class 2 for high reliability.
• Designed for compatible ET 200SP PROFINET devices.  

4. Typical Application

• ET 200SP PROFINET installations in demanding environmental conditions.
• Distributed industrial automation systems.
• Optical PROFINET communication through multimode glass fiber.
• Factory automation and control-cabinet applications requiring conformal-coated components.
• Industrial networks where two LC optical connections are required.
• Applications exposed to environmental substances covered by the SIPLUS design specification.  

5. Product Highlights

The 6AG1193-6AG00-2AA0 combines the ET 200SP BA 2xLC optical interface with SIPLUS conformal-coating characteristics. Its two LC ports support multimode fiber up to 3 km, while the SIPLUS construction is intended for applications with increased environmental requirements. This makes the product distinct from the standard 6ES7193-6AG00-0AA0 and important to specify by its exact SIPLUS article number.  

6. Important Ordering & Installation Information

• Order the exact SIPLUS article number 6AG1193-6AG00-2AA0.
• The product is based on 6ES7193-6AG00-0AA0, but it is not the same article.
• Use compatible multimode glass fiber and LC connectors.
• Observe the specified 3 km maximum fiber length.
• The SIPLUS product incorporates conformal coating; avoid treating it as an interchangeable generic replacement without verifying environmental and system requirements.
• Verify compatibility with the target ET 200SP PROFINET device.
• Unused interfaces should be protected according to the manufacturer's installation documentation where applicable.  

Always follow the manufacturer's official installation, wiring, commissioning and safety instructions.

7. Why Choose Siemens 6AG1193-6AG00-2AA0?

The Siemens 6AG1193-6AG00-2AA0 is appropriate when an ET 200SP installation requires the BA 2xLC optical interface together with SIPLUS conformal-coating characteristics. Its two LC multimode ports, 3 km fiber capability and documented environmental design make it suitable for demanding industrial PROFINET applications where the standard Bus Adapter may not provide the required environmental construction.  

8. Product Summary

The Siemens 6AG1193-6AG00-2AA0 is a SIPLUS ET 200SP BA 2xLC PROFINET Bus Adapter based on 6ES7193-6AG00-0AA0. It provides one PROFINET interface with two switched LC multimode glass-fiber ports. The specified multimode fiber reach is up to 3 km for both 50/125 µm and 62.5/125 µm fiber. The SIPLUS version features conformal coating and an operating temperature specification of -40 to +60 °C in the available documentation. Dimensions are 20 × 69.5 × 59 mm and weight is approximately 40 g.

Product Code: 6AG1193-6AG00-2AA0
Manufacturer: Siemens
Product Family: SIPLUS ET 200SP Bus Adapters
Product Type: SIPLUS BA 2xLC PROFINET Bus Adapter