SIEMENS SIMATIC Base Unit Type D0, BU20-P12+A0+0B Bangladesh. Mlfb - 6ES7193-6BP00-0BD0 price

The Siemens 6ES7193-6BP00-0BD0 is a SIMATIC ET 200SP BU20-P12+A0+0B, BU type D0 Base Unit. It provides the electrical and mechanical interface between compatible ET 200SP modules and external field wiring. The Base Unit uses push-in terminals, has no AUX terminals and is bridged to the left. Siemens documentation specifies a 20 mm width and 117 mm height, with a 35 mm depth in current documentation. The unit is rated for the applicable P1/P2 and process-terminal circuits, with documentation specifying up to 5 A current carrying capacity at 60 °C and up to 10 A for the P1/P2 and AUX bus ratings where applicable. Siemens also documents electrical separation between the backplane bus and supply voltage and an integrated mains filter between N and FE. The product has entered phase-out status, so exact replacement and functional-version compatibility should be checked before procurement.

2. Technical Specification

Specification	Details
Manufacturer	Siemens
Product Code	6ES7193-6BP00-0BD0
Product Family	SIMATIC ET 200SP Base Units
Product Type	BU20-P12+A0+0B, BU type D0
Terminal Type	Push-in terminals
AUX Terminals	None
Potential Group	Bridged to the left
Rated AC Value	277 V; process-terminal ratings depend on circuit configuration
Maximum Current Carrying Capacity	5 A up to 60 °C
P1/P2 Bus Current	10 A max.
AUX Bus Current	10 A max.
Process Terminal Current	5 A max.
Mains Filter	Integrated, between N and FE
Slots	1
Width	20 mm
Height	117 mm
Depth	35 mm
Weight	Approx. 47 g
Hardware Functional Status	FS10 and higher
Operating Temperature	-30 °C to +60 °C horizontal; -30 °C to +50 °C vertical
Installation Altitude	Up to 2,000 m; higher altitudes on request

3. Key Features

• SIMATIC ET 200SP BaseUnit type D0.
• BU20-P12+A0+0B configuration.
• Push-in terminals.
• No AUX terminals.
• Bridged to the left.
• Integrated mains filter between N and FE.
• 5 A maximum current carrying capacity at up to 60 °C.
• Electrical separation between backplane bus and supply voltage.
• Compact 20 × 117 × 35 mm construction.
• Hardware functional status FS10 and higher in current documentation.

4. Typical Application

• Existing SIMATIC ET 200SP installations.
• Distributed control-panel I/O.
• Machine and factory automation.
• Replacement and maintenance of compatible D0 Base Units.
• ET 200SP assemblies requiring the BU20-P12+A0+0B configuration.

5. Product Highlights

The 6ES7193-6BP00-0BD0 provides the established D0 Base Unit architecture with 12 process-terminal positions, no AUX terminals and left-side bridging. Its integrated mains filter and documented electrical separation are relevant to the electrical design of compatible ET 200SP stations. Because Siemens identifies the product as being in phase-out status, its strongest procurement consideration is exact compatibility with an existing installation rather than substitution by a visually similar Base Unit.

6. Important Ordering & Installation Information

• Order the exact article number 6ES7193-6BP00-0BD0 when replacing the same Base Unit.
• Siemens documentation identifies this product as phase-out started; check current Siemens lifecycle information before new-system procurement.
• The Base Unit is BU type D0 and should only be paired with compatible modules.
• Verify functional status requirements, particularly FS10 or higher where applicable.
• Confirm the electrical ratings of the connected circuit.
• The ET 200SP Base Unit manual warns that older functional versions may have restricted use with higher supply voltages; verify the functional version before installation.
• Do not assume that a later-looking Base Unit is a direct substitute without checking the Siemens compatibility documentation.

Always follow the manufacturer's official installation, wiring, commissioning and safety instructions.

7. Why Choose Siemens 6ES7193-6BP00-0BD0?

The 6ES7193-6BP00-0BD0 remains relevant for maintenance and replacement of compatible ET 200SP D0 installations. Its established terminal configuration, left-side bridging, integrated mains filter and defined electrical separation make exact article-number matching important for installed systems. For new designs, Siemens lifecycle and replacement guidance should be checked first.

8. Product Summary

The Siemens 6ES7193-6BP00-0BD0 is a SIMATIC ET 200SP BU20-P12+A0+0B, BU type D0 Base Unit. It uses push-in terminals, has no AUX terminals and is bridged to the left. The Base Unit provides the electrical and mechanical connection for compatible ET 200SP I/O modules and has a 20 × 117 × 35 mm form factor. Its documented maximum current carrying capacity is 5 A at up to 60 °C, while relevant bus ratings can reach 10 A. An integrated mains filter is provided between N and FE. Siemens has identified this article as having entered phase-out, making exact compatibility and replacement verification particularly important for procurement and maintenance applications.

Product Code: 6ES7193-6BP00-0BD0
Manufacturer: Siemens
Product Family: SIMATIC ET 200SP Base Units
Product Type: BU20-P12+A0+0B, BU type D0